When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission.
Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network
Payne PA13NR060000AAAA Defrost Sensor Board
The defrost control board determines when or if to start an important defrosting cycle in order to keep the outdoor unit free from frost build-up. It is relayed information from a temperature sensor located somewhere by the condenser to decide when the defrost cycle should begin.
Indications of a poorly working Payne defrost sensor board
- The main board could signify an alphanumeric error code produced by too much frost
- Air conditioning may stop working due to the fact that there is too much frost
- Defrost mode never initiates even when there is a large quantity of frost on the outdoor unit
This site contains affiliate links for which I may be compensated
Before you decide on buying or ordering a new Payne PA13NR060000AAAA replacement part do your best and cross-check the model number and also make a visual inspection in order to be sure the correct replacement defrost sensor board is the one being purchased. If you are not sure about installing the defrost sensor board on your own then it would be in your best interest to consult a pro to do the replacement of the part.
Feel free to download your manual for help.
This site contains affiliate links for which I may be compensated
